It is best to detect any eye disorder early as this make most treatments easy as less costly. For this reason, children are taken through vision screening starting from early age. Conducting this form of screening without having to visit an optician could have been impossible if not for a vision screener which has made it a cheap and easy venture on a large scale in community settings such as health fairs, fun days, preschools and grade schools, churches, medical centers and even the pediatrician clinics or at homes.
This important device is supported by a list of impressive testimonials resulting from validated studies which are qualified by positive reviews from the general medical profession and the public. It is so easy to use hence preferred by pediatricians, Lions club and school nurses. Given that the only necessary compliance is a short fixation of camera, this form of screening works for all children. The device works by producing a specially designed sound targeted to provoke the fixation.
The only required compliance is a short camera fixation. It has high level of accuracy and the results can be fully trusted. It is also able to screen two eyes all at once and the distance required for screening is about one meter or 3.3 feet from the camera. After just 0.8 seconds, the (PASS or REFER) results can be displayed on the screen automatically.
This means that even non-medical staff can actually perform the screening. The person to perform screening starts by pulling the camera trigger to start; this is followed by a sound that is meant to attract attention. The image of both eyes is captured on a white triangle on the screen that then allows for performing the necessary measurements. The recommended screening distance is one meter (3.3 feet) from the camera. The tolerance level is +-5 centimeters or +-2 inches. The results are then displayed on the screen in a matter of seconds.
The measurements performed revolve around refraction size, the size of the pupil and the cornea reflexes. These are then compared with the data used for referral to determine if they are within the normal range or not and the PASS or REFERAL results is then generated. In order to diagnose anisometropia, the refractions of both of the eyes are compared and the deference compared with the standards reference.
There are several conditions that are detected after the performance of a number of measurements and tests which revolve around measuring and comparing the sizes of cornea reflexes, the pupil size and the refraction size. These data is then compared to predetermined data used for referral.
A PASS displayed on the screen implies that all readings are within the recommended limit meaning that none of the conditions has been detected. In case of one or more of measurements or not within the limit, the result displayed is a REFER. Either a REFER or PASS is displayed on the screen as soon as the measurement is complete.
This can either be a PASS that indicates that all measurements are within the normal range and hence none of the conditions has been detected. In case any of the measurement is not within the normal range, a REFER is the result displayed and it requires visiting the optician.
This important device is supported by a list of impressive testimonials resulting from validated studies which are qualified by positive reviews from the general medical profession and the public. It is so easy to use hence preferred by pediatricians, Lions club and school nurses. Given that the only necessary compliance is a short fixation of camera, this form of screening works for all children. The device works by producing a specially designed sound targeted to provoke the fixation.
The only required compliance is a short camera fixation. It has high level of accuracy and the results can be fully trusted. It is also able to screen two eyes all at once and the distance required for screening is about one meter or 3.3 feet from the camera. After just 0.8 seconds, the (PASS or REFER) results can be displayed on the screen automatically.
This means that even non-medical staff can actually perform the screening. The person to perform screening starts by pulling the camera trigger to start; this is followed by a sound that is meant to attract attention. The image of both eyes is captured on a white triangle on the screen that then allows for performing the necessary measurements. The recommended screening distance is one meter (3.3 feet) from the camera. The tolerance level is +-5 centimeters or +-2 inches. The results are then displayed on the screen in a matter of seconds.
The measurements performed revolve around refraction size, the size of the pupil and the cornea reflexes. These are then compared with the data used for referral to determine if they are within the normal range or not and the PASS or REFERAL results is then generated. In order to diagnose anisometropia, the refractions of both of the eyes are compared and the deference compared with the standards reference.
There are several conditions that are detected after the performance of a number of measurements and tests which revolve around measuring and comparing the sizes of cornea reflexes, the pupil size and the refraction size. These data is then compared to predetermined data used for referral.
A PASS displayed on the screen implies that all readings are within the recommended limit meaning that none of the conditions has been detected. In case of one or more of measurements or not within the limit, the result displayed is a REFER. Either a REFER or PASS is displayed on the screen as soon as the measurement is complete.
This can either be a PASS that indicates that all measurements are within the normal range and hence none of the conditions has been detected. In case any of the measurement is not within the normal range, a REFER is the result displayed and it requires visiting the optician.
About the Author:
If you are looking for information about a reliable vision screener, pay a visit to our web pages here today. You can see details at http://www.henanmedical.com now.
Aucun commentaire:
Enregistrer un commentaire