lundi 17 mars 2014

Pool Table Refelting Is Best Left To The Professionals

By Leticia Jensen


Pool tables can develop worn spots and rips in the surface if not treated carefully. This will throw a game off for most people and charges of fixing the game in favor of you can be brought by even the friendliest competitors. The nature of the covering, which is felt, will have a lot to do with how the table is used, so a rip or worn area must be repaired or replaced. This pool table refelting is best done by a company who does this all of the time.

If it is a small rip, it can be repaired by you with a lot of patience and a good quality adhesive. A very sharp knife will also be needed as well as some sandpaper. Measuring the hole, cutting the felt and making sure it fits will take attention to detail. Just the right amount of glue will also not be easy to judge. But, again, looks are not as important as how it might effect the game.

One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.

The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.

That color green has been done to death. It looks like all other pool tables and you may want something with a little more color or depth to it. You can select many of the blues, purples, reds, cream and even many with images on them as well as designs of various natures. Making your table stand out from the rest will help people remember they would like to come to your next party, and the next.

Watching the professionals go to work on your table will help you understand what they are doing and more about this game piece. The measurements will be exacting as will the dismantling of the rails. Removing the felt and old glue will make the way clear for the new piece. Old staples will also be removed so they do not interfere with a proper installation.

The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.

Disassembled rails are covered and reinstalled. Since the pool table is more than just good looks, a proper refelting job is more than important. Making sure the enjoyment of this game piece continues is what this is all about. Bragging rights for your selection of a interesting color or design is also in the offing.




About the Author:



Aucun commentaire:

Enregistrer un commentaire

visitores

Flag Counter